|
ESSEN 'CB' series Terminal Blocks have been designed for simple and economical grouping of any number of ways. The design is such that they can be assembled in the channel, at any point, not necessarily at the ends, with the minimum of disturbance without dismantling. The blocks conform to high electrical and mechanical standards, while the size is reduced to a minimum. A barrier plate is required to complete an assembly which is retained by end clamps. Identification can be provided by a white plastic strip.
|
A |
B |
C |
D |
| CB-30 |
16.50 |
13.50 |
17.70 |
11.00 |
| CB-40 |
18.50 |
15.95 |
20.60 |
11.85 |
BASIC UNIT AND ACCESSORIES
| Unit |
Cat. No. |
Description |
|
A |
CB-30 or CB-40 |
Body with connecting link and studs, each stud fitted with two plain washers, one spring washer and one nut. |
|
B |
CE-30/40 |
Moulded barrier plate of ample size to prevent flashover. |
|
C |
CEC-30/40 |
Steel end clamp. One required at each end of group. |
|
D |
CC-30/40 |
Zinc Plated slotted steel channel in 300, 500 and 1000mm lengths. |
|
E |
CL-30/40 |
Identification plastic strip suitable for machine engraving or heat embossing. 1000 mm standard length. |
|
F |
CB-30N or CB-40N |
Preassembled CB-30 or CB-40 with 'N' number of ways.
|
TECHNICAL DATA
| Cat. No. |
Terminal Studs |
Current Carrying capacity |
Body and Barrier plate |
Connecting link |
Channel |
End clamp and screw |
Test Voltage |
| CB-30 |
Brass
Nickel Plated |
30 Amp |
Thermoplastic |
Brass
Nickel Plated |
Steel Zinc
Plated |
Steel Zinc
Plated |
2000V between
adjacent terminals |
| CB-40 |
Brass
Nickel Plated |
40 Amp |
|
|
Steel Zinc
Plated |
Steel Zinc
Plated |
2000V between
terminals and steel channel |
All dimensions are in mm.
Due to continuous improvement in products, we reserve the right to alter specifications without prior notice. |
